Kreg

The Kreg DB210 Foreman Pocket-Hole Machine is a benchtop woodworking machine designed for fast, repeatable pocket-hole production. Its integrated 120V motor, adjustable fence, workpiece clamping system, and large control handle allow the operator to clamp and drill in one controlled motion. Key Benefits Integrated...

The Kreg DB210-HDB Foreman Drill Bit is a heavy-duty replacement drilling accessory designed for compatible Kreg Foreman pocket-hole machines. It is intended for creating heavy-duty pocket holes in thick lumber and demanding woodworking projects. Key Benefits Heavy-duty configuration supports pocket-hole joinery in compatible thick...

The Kreg DB210-MBB Foreman Pocket-Hole Drill Bit with Drill Guide is a heavy-duty replacement and conversion accessory designed for compatible Kreg Foreman pocket-hole machines. It uses a 19/64-inch drill bit to create heavy-duty pocket holes for joining thicker woodworking materials. Key Benefits Heavy-duty configuration...

The Kreg DDS-INT Square Driver Set includes two #2 square-drive bits in 3-inch and 6-inch lengths for installing compatible Kreg Pocket-Hole Screws and other square-drive fasteners. The two lengths provide convenient options for standard fastening and recessed or hard-to-reach pocket holes. Key Benefits Includes...

The Kreg KBC3-BAS Bench Clamp with Base is a benchtop clamping system designed for woodworking assembly, routing, cutting, sanding, drilling, and general project work. It combines a 3-inch Automaxx® Bench Clamp with a cast-aluminum base that mounts in compatible bench-dog holes. Key Benefits Automaxx®...

The Kreg KBC3-SYS Bench Clamp System is a benchtop workholding solution designed for woodworking assembly, routing, cutting, sanding, drilling, and repair work. It combines a 3-inch Automaxx® Bench Clamp with a recessed aluminum clamp plate to create a flexible 360-degree clamping station. Key Benefits...

The Kreg KBC3-VISE Clamp Vise is a multipurpose benchtop clamping system designed for holding woodworking components vertically or horizontally during assembly, sanding, drilling, routing, cutting, and repair work. It combines a 3-inch Bench Clamp with an anodized-aluminum vise plate, adjustable clamp blocks, and bench...

The Kreg KBCBA Bench Clamp Base is a movable workbench accessory designed to convert a compatible work surface into a flexible clamping station. It accepts Kreg Bench Clamps and mounts through a standard bench-dog hole for woodworking assembly, routing, cutting, sanding, drilling, and repair...

The Kreg KBCIC In-Line Clamp is a low-profile workbench clamp designed to secure workpieces by applying pressure from the side rather than from above. Its bench-dog mounting peg fits compatible 19mm, 20mm, and standard 3/4" workbench holes, allowing flexible positioning without obstructing the top...

The Kreg KCS-DFMT-PRO Drawer Front Mounting Kit is a cabinetmaking system designed to hold, align, and position drawer fronts during installation. It includes left- and right-side mounting tools plus seven magnetic setup and spacer shims for creating consistent gaps, reveals, and drawer-front placement. Key...

The Kreg KCT-COMBO Clamp Table with Steel Stand is a dedicated woodworking clamping station designed for assembly, pocket-hole joinery, sanding, drilling, routing, layout, and other workshop tasks. It combines the Kreg Clamp Table with the KRS1035 Multi-Purpose Shop Stand to provide a stable, height-adjustable...

The Kreg KDG-6000 Drilling Guide is a portable hand-drilling accessory designed to help create straight, accurately positioned holes without requiring a drill press. It features six hardened-steel guides for common drill-bit sizes from 1/8" to 1/2". Key Benefits Hardened-steel guides help keep compatible drill...

The Kreg KDRV-90DG 90° Pocket-Hole Driver is a compact right-angle driving attachment designed for installing pocket-hole screws in tight or restricted spaces. Its ergonomic housing, locking bit retainer, and included magnetic-tip square-drive bit support controlled fastening where a standard drill or impact driver cannot...

The Kreg KDRV-FLIP Quick-Flip is a dual-function drilling and driving accessory designed for creating strong wood joints with compatible Kreg screws. One end drills a pilot hole and flat-bottomed counterbore, while the opposite end drives the screw using a #2 square-drive bit. Key Benefits...

The Kreg KFS-PUCK Multipurpose Project Blocks are compact workshop supports designed to elevate and stabilize workpieces during sanding, routing, drilling, assembly, painting, and finishing. Each set includes four hexagonal blocks with GripMaxx™ anti-slip surfaces and retractable painting points. Key Benefits Raises workpieces 1-1/2" above...

The Kreg KHC-PREMIUM Classic Face Clamp is a 3-inch woodworking clamp designed to hold project components flush during pocket-hole assembly, furniture construction, repairs, and general workshop clamping. Its large clamp pads distribute pressure across the workpiece, while the manual adjustment screw accommodates materials up...

The Kreg KHC3-INT Wood Project Clamp is a 3-inch woodworking clamp designed for pocket-hole joinery, project assembly, repairs, and general clamping tasks. Its Automaxx® auto-adjust technology automatically adapts to different material thicknesses while maintaining the selected clamping pressure. Key Benefits Automatically adjusts to materials...

The Kreg KHC6 Wood Project Clamp is a 6-inch woodworking clamp designed for pocket-hole joinery, project assembly, repairs, and general clamping tasks. Its Automaxx® auto-adjust technology automatically adapts to different material thicknesses while maintaining the selected clamping pressure. Key Benefits Provides a 6" or...

The Kreg KHCCC 90° Corner Clamp is a woodworking assembly clamp designed to hold corners and T-joints securely at a 90-degree angle. Its Automaxx® auto-adjusting mechanism, cast-aluminum clamp pads, and integrated edge stops support accurate alignment when assembling boxes, drawers, cabinets, frames, and similar...

The Kreg KHCRA-INT Right Angle Clamp is a woodworking assembly clamp designed to hold two workpieces together at a 90-degree angle while pocket-hole screws are installed. Its steel alignment pin fits into a standard Kreg pocket hole, while the swiveling clamp pad secures the...

The Kreg KHI-CDIJ-INT Cabinet Door Mounting Jig is a cabinet-installation aid designed to support and position doors while concealed hinges are attached. It works with both face-frame and frameless cabinets, as well as left- and right-hand cabinet doors. Key Benefits Support arm holds the...

The Kreg KHI-PROMO-20 Hardware Jig Installation Kit is a complete cabinet-hardware installation set designed for mounting drawer slides, concealed hinges, knobs, and pulls with improved accuracy and repeatability. It combines three adjustable Kreg installation jigs with two Classic 2" Face Clamps for secure positioning...

The Kreg KHI-SLIDE-INT Drawer Slide Jig is a cabinet-installation tool designed to position drawer slides accurately and support drawer boxes during installation. Its reversible brackets help keep slides level and aligned when working with face-frame or frameless cabinets. Key Benefits Built-in indexing tabs help...

The Kreg KIC6 Wood Project Clamp is a 6-inch heavy-duty woodworking clamp designed for project assembly, pocket-hole joinery, repairs, and general clamping work. Its Automaxx® auto-adjust technology automatically adapts to different material thicknesses while maintaining the selected clamping pressure. Key Benefits Automaxx® system automatically...

The Kreg KJD/MICROBIT Micro-Pocket™ Drill Bit is a replacement stepped drill bit designed for compatible Kreg Micro-Pocket™ joinery systems. Its 19/64-inch diameter creates compact pocket holes for thinner materials, narrow workpieces, small projects, and woodworking repairs. Key Benefits Creates compact Micro-Pocket™ holes using a...

The Kreg KJSC/D Depth Collar with Hex Key is a replacement drilling accessory designed for setting and securing the drilling depth on a compatible Kreg drill bit. It provides a practical replacement for a worn, damaged, or missing depth collar and adjustment key. Key...

The Kreg KKS1030 Clamp Block Set is a workpiece-positioning accessory designed for compatible Kreg Clamp Trak™ and Clamp Table systems. The blocks create raised reference stops that help align, square, and repeatedly position project components during woodworking assembly. Key Benefits Quickly registers workpieces against...

The Kreg KKS1070 Bench Dogs are workbench accessories designed to position, support, and secure workpieces during routing, cutting, sanding, assembly, and other woodworking tasks. They fit standard 3/4" or 19mm bench-dog holes and include removable Bench Brakes™ that provide a non-slip, non-marring contact surface....

The Kreg KKS2745 Universal Clamp Track Kit is a workbench clamping system designed to add flexible clamp positioning to new or existing work surfaces. It includes two anodized-aluminum Clamp Traks that accept compatible Kreg Bench Clamps and may be installed using either a surface-mount...

The Kreg KLTJ100 MortiseMate™ Loose Tenon Jig is a precision woodworking system designed to create concealed loose-tenon joints using a compatible drill. Its auto-indexing mechanism, adjustable mortise width, and controlled cutting depth support accurate joinery for furniture, cabinetry, frames, panels, and other woodworking projects....

The Kreg KMA-3000 Panel Carrier is a one-person material-handling tool designed to make full-size plywood, MDF, drywall, and other sheet goods easier to lift and transport. Its self-adjusting clamping action, GripMaxx™ contact pads, and padded ergonomic handle provide a secure grip on panels up...