MTD 11A-020W700 (120cc) Engine Powered Lawn Mower 20" Engine: 4HP Briggs & Stratton Engine Deck: 20" Side Discharge Cutting Deck 3 Months Service Warranty

Wadfow WAG851801 Angle grinder 1800W Voltage:220-240V~50/60HzInput power:1800WNo-load speed:8480rpmDisc diameter:180mmSpindle thread:M14With 1pcs auxiliary handleDisc not included

Wadfow WAG852001 Angle grinder 2000W Voltage:220-240V~50/60HzInput power:2000WNo-load speed:6500rpmDisc diameter:230mmSpindle thread:M14With 1pcs auxiliary handleDisc not included

Wadfow WXD151400 Miter Saw 8" 1400W Voltage: 220-240V~50/60HzInput power: 1400WNo-load speed: 5000rpmBlade size: 210mmx25.4mmMax.cutting capacity: 55mmx120mmCutting capacity:Mitre/Bevel:Height x Width0°/0°: 55mmx120mm45°/0°: 55mmx83mm0°/45°: 30mmx120mm45°/45°: 30mmx83mmMitre cuts 0-45°left and rightBevel cuts up to 45°to the leftInclude:1 Pcs TCT blade1 Pcs dust bag 6 Months Limited Warranty

Wadfow WAT2505 Pneumatic Air Sander 6" Without quick plugSanding pad: 6"(150mm)Air lnlet(PT): 1/4"No-load speed: 10500rpmAir hose(ID): 3/8"Air cons: 3cfm(84l/min)Air pressure: 90psi,6.3bar

Wadfow WDR35751 Drywall Sander 750W Voltage:220-240V~50/60HzInput power:750WNo-load speed:610-2150rpmGrinding pad diameter:180mmSanding paper diameter:180mmDust hose diameter:32mmIntegrated work lightWith 1pcs auxiliary handleWith 6pcs sand papersWith 1pcs screwdriverWith 1pcs hex wrenchWith 1pcs dust bagWith 2pcs washersWith 2pcs jointsWith 2m flexible pipe4 6 Months Limited Warranty

Wadfow WFA1502 Palm Sander 240W Voltage: 220-240V~50/60Hz Input power: 240WNo-load speed: 14000rpmBottom base: 110mmx100mmInclude:1 Pcs sand paper 6 Months Limited Warranty 

Wadfow WCK2016 Li-Ion Cordless 20V 2Pcs Combo Kit Voltage: 20V1 Pcs Lithium-Ion cordless drill(WCDP511)1 Pcs Lithium-Ion impact driver(WCD2512)Lithium-Ion impact driver(WCD2512):Brushless motorHex shank: 6.35mmNo-load speed: 0-1300/0-2100rpmImpact rate: 0-2000/0-3300bpmMax torque: 170Nm Lithium-Ion cordless drill(WCDP511):No-load speed: 0-400/0-1500rpmMax torque: 35NmChuck capacity: 0.8-10mmTorque settings: 15+1Mechanical 2-speed gearLED battery power...

DCA APB32 Impact Wrench 1" Drive 900Nm Maximum output torque 950N.m, with extended output shaft; Rubber-covered front; Meta gear box; Rocker type reversing switch. Specifications: Rated Power Input：1050WNo-load Speed：1400r/minRated Impact Frequency : 1500/minCapacities(Bolt Size): M22-M30mmSquare Drive：25.4×25.4mmMax. Fastening Torque: 400-900N·mInclusionsSocket 36mm, Socket Pin, O Ring,...

DCA ADJF03-15 B 12V Cordless Reciprocating Saw [Kit] SDS quick change system Adjustable speed Specifications:  Model : ADJF03-15BBattery : 12V Max Stroke Length : 14.5MM Max Cutting Depth : * Metal : 8MM * Wood : 65MM * Pipe : Φ50mmNo-Load Strokes : 0-3000RPMInclusions-...

DCA ADPM40 EK 12V Cordless Riveter / Rivet Gun [Kit] Pulling rivets faster;  φ2.4-φ4.0 for all-purpose. Specifications Battery: 12VMAX/2.0Ahx2/SoloStroke： 20 mmCapacity： Φ2.4-Φ4.0 For All-purposeΦ2.4-Φ5.0 For Aluminum Blind RivetPull the nail fastMax.Tension: 7000NNet Weight： 1.6kg/1.4kg Inclusions Battery Charger, 2.0Ah Battery Pack (2pcs), Nosepiece (4pcs), Mandrel...

Wadfow WRAP5010 Li-Ion Sheet Sander 20V(Bare) Voltage:20VNo-load speed:12000rpmBottom size:110mmx100mmInclude:5 Pcs sand paper 6 Months Limited Warranty 

Wadfow WRAP5020 Li-Ion Palm Sander 20V(Bare) Voltage:20VNo-load speed:12000rpmInclude:1 Pcs finger pad3 Pcs finger sand paper3 Pcs sand paper 6 Months Limited Warranty 

Wadfow WLBS1501 Li-Ion Mini Belt Sander 20V(Bare) Voltage: 20V No load speed: 460m/minWith brushed motorFor wood and metal polishing5 pcs sanding belt(3pcs80#,2pcs120#)Dust adaptor Battery and charger sold separately  6 Months Limited Warranty

Wadfow WLYP540 Li-Ion Hedge Trimmer 20V(Bare) Voltage:20VNo-load speed:2400/minBlade cutting length:460mmMaximum cutting diameter:15mmLaser cut blade Battery and charger sold separately 6 Months Limited Warranty 

Wadfow WBN2540 Pneumatic 2in1 Combo Brad Nailer Without quick plugLoad capacity:100PcsBrad size:15-50mm Ga18,1.25X1.0mmStaple size:16-40mmGa18,1.25X1.0mmQuick release nosepiece for fast clearing off jamsAdjustable depth of driveTouch strike security system is safe for the operatorOperation pressure:0.4-0.7Mpa(60-100Psi)

S-Ks 4pcs Impact Driver Bit Set 35mm (SKSIBSM35) 4 pcs impact bit set 35mm long (5/16") PH2,PH3, Flat 8,10mm Impact-rated hex bits are required to stand up to the force exerted by the impact driver. Standard drills are primarily used for drilling holes and...

S-Ks 4pcs Impact Driver Bit Set 80mm (SKSIBSM80) 4 pcs impact bit set 80mm long PH2,PH3, Flat 8,10mm Impact-rated hex bits are required to stand up to the force exerted by the impact driver. Standard drills are primarily used for drilling holes and driving...

Wadfow WBN3532 Pneumatic Brad Nailer Without quick plugLoad capacity: 100pcsBrad size: 10-30mmGa18,1.25x1.00mmWithout safety triggerOperation pressure: 0.4-0.7MPa(60-100psi)

Wadfow WBN3564 Pneumatic Concrete Nailer Without quick plugLoad capacity: 70pcsNails length: 18-64mmNails diameter: 2.2mmOperation pressure: 5-8bar(75-116Psi)

Wadfow WYM1B13 Impact Driver Set 13Pcs 13 Pcs impact driver setInclude:1 Pcs impact driver1 Pcs 1/2"-5/16" sleeve adapter13 Pcs screwdriver bits: SL5/SL6/SL8/SL9/PH1/PH2*2/PH3/PH4/H4/H5/H6/H8Bits material: Cr-V, heat treatment

Crown CT13410 Angle Grinder 4" 600W M10 spindle thread Spindle lock Specifications Rated Power: 600WRated Speed: 11000rpmMax Ø of Cutting disc 100mmMax Ø of Grinding disc 100mmMax Ø of Rubber Sanding Plate: 100mmMax Ø of Circular Wire Brush: 65mmMax Ø of Cup Wire Brush:...

Crown CT13501 Angle Grinder 4" 650W M10 spindle thread Spindle lock Specifications Rated Power: 650WRated Speed: 11000rpmAmp. 220V-230V: 3AMax Ø of Cutting disc 100mmMax Ø of Grinding disc 100mmMax Ø of Rubber Sanding Plate: 100mmMax Ø of Circular Wire Brush: 65mmMax Ø of Cup...

Crown CT13559 Angle Grinder 4" 650W M10 Spindle Thread Spindle Lock Rear Switch Specifications Rated Power: 650WRated Speed: 11000rpmAmp. 220V-230V: 3.2AMax Ø of Cutting disc 100mmMax Ø of Grinding disc 100mmMax Ø of Rubber Sanding Plate: 100mmMax Ø of Circular Wire Brush: 65mmMax Ø...

Crown CT13499 Angle Grinder 4" 720W M10 Spindle Thread Spindle Lock Rear Switch Specifications Rated Power: 720WRated Speed: 11000rpmAmp. 220V-230V: 3.3AMax Ø of Cutting disc 100mmMax Ø of Grinding disc 100mmMax Ø of Rubber Sanding Plate: 100mmMax Ø of Circular Wire Brush: 65mmMax Ø...

Crown CT13497 Angle Grinder 4" 860W Spindle Thread Spindle Lock 2-Step Switch Mechanism Specifications Rated Power: 860WRated Speed: 11000rpmAmp. at 220V-230V: 3.9ASpindle Thread: M10Max Ø of Cutting Disc: 100mmMax Ø of Grinding Disc: 100mmMax Ø of Rubber Sanding Plate: 100mmMax Ø of Circular Wire...

Crown CT13504 Angle Grinder 4" 860W M10 spindle thread Spindle lock Lock-on function Rear switch Specifications Rated Power: 860WRated Speed: 11000rpmAmp. 220V-230V: 3.9AMax Ø of Cutting Disc: 100mmMax Ø of Grinding Disc: 100mmMax Ø of Rubber Sanding Plate: 100mmMax Ø of Circular Wire Brush:...

Crown CT13502 Angle Grinder 4" 1100W M10 spindle thread Spindle lock Lock-on function Rear switch Specifications Rated Power: 1100WRated Speed: 11000rpmAmp. 220V-230V: 4.5AMax Ø of Cutting Disc: 100mmMax Ø of Grinding Disc: 100mmMax Ø of Rubber Sanding Plate: 100mmMax Ø of Circular Wire Brush:...

Crown CT13567 Angle Grinder 5" 1010W M14 spindle thread Soft start* Spindle lock Restart protection* Two-position on / off switch Specifications Rated Power: 1010WRated Speed: 12000rpmAmp. 220V-230V: 4.5AMax Ø of Cutting Disc: 125mmMax Ø of Grinding Disc: 125mmMax Ø of Rubber Sanding Plate: 125mmMax...

Crown CT13500 Angle Grinder 7" 2200W Spindle Thread Spindle Lock Lock-on Function Soft Grip Specifications Rated Power: 2200WRated Speed: 8500rpmAmp. at 220V-230V: 10ASpindle Thread: M14Max Ø of Cutting Disc: 180mmMax Ø of Grinding Disc: 180mmMax Ø of Rubber Sanding Plate: 180mmMax Ø of Circular...

Crown CT13500 Angle Grinder 7" 2200W M14 Spindle Thread Spindle Lock Lock-on Function Soft Grip Specifications Rated Power: 2600WRated Speed: 8500rpmAmp. at 220V-230V: 12ASpindle Thread: M14Max Ø of Cutting Disc: 180mmMax Ø of Grinding Disc: 180mmMax Ø of Rubber Sanding Plate: 180mmMax Ø of...

Crown CT13489 Angle Grinder 9" 2600W M14 Spindle Thread Spindle Lock Lock-on Function Soft Grip Specifications Rated Power: 2600WRated Speed: 8500rpmAmp. at 220V-230V: 12ASpindle Thread: M14Max Ø of Cutting Disc: 180mmMax Ø of Grinding Disc: 180mmMax Ø of Rubber Sanding Plate: 180mmMax Ø of...

Wadfow WBN3530 Pneumatic Brad Nailer With Safety Trigger Without quick plugLoad capacity: 100pcsBrad size: 10-30mmGa18,1.25x1.00mmWith safety triggerOperation pressure: 0.4-0.7Mpa(60-100Psi)

Wadfow WLSY1508 Cordless Knapsack Sprayer 12V 16L 16L Lead-acid battery sprayerCapacity: 16LType of battery: Lead-acid (internal)Battery voltage: 12V 8AhWorking time: 240minCharging time: 480minSpray distance: ＞5mSprays up to 3.1L/minCopper wire motorNet weight: 3.5kg

Wadfow Hammer Drill Bit SDS Plus Model Size Price WHD1202 6X110MM 45.00 WHD1203 8X110MM 45.00 WHD1204 10X110MM 50.00 WHD1205 6X160MM 45.00 WHD1206 8X160MM 50.00 WHD1207 10X160MM 55.00 WHD1208 12X160MM 60.00

Wadfow Hammer Drill Bit SDS Plus (Double Flute) Double flute and cross carbide tip Model Size Price WHD3201 6X160MM 55.00 WHD3202 8X160MM 65.00 WHD3203 10X160MM 75.00 WHD3204 12X160MM 90.00

Wadfow WJB118A Jigsaw Blade for Metal Basic for metalLength of tooth:50mm21TPIHSS,milled and wavy set teeth5pcs/setApplication for thin sheet metals(1-3mm)

Wadfow WJB111C Jigsaw Blade for Wood Basic for woodLength of tooth:74m8TPIHCS,milled5pcs/setApplication for soft wood(4-50mm),chipboards,wood core plywood,fibre boards,quick cut

S-Ks Gun Tacker / Stapler Gun 4-8mm (TST-50010) The S-Ks Gun Tacker / Stapler Gun 4-8mm (TST-50010) is a professional-grade tool designed for precision and efficiency. With its adjustable stapling depth and compatibility with 4-8mm staples, it offers versatility for various projects. The durable...

Wadfow WHG1514 Heat Gun 1800W Voltage:220V-240V~50/60HzInput power:1800WTemperature:350°C/550°CAirflow:300/500 L/minWith 1pcs nozzle

Wadfow WCDS510 Li-Ion Cordless Drill 12v 1.5AH Voltage:12VNo-load speed:0-750rpmMax torque:20NMChuck capacity:0.8-10mmTorque settings:15+1Integrated work lightLED battery power indicatorWith 1pcs 1.5Ah battery pack（WLBS5150）Battery charging port: USB type-C Charger sold separately 6 Months Limited Warranty 

Crown CT15199-185 Circular Saw 1200W 7" • Depth Adjustment• Angular Adjustment• Lock-on Function• Soft grip   Specifications Rated Power: 1200WAmp. at 220V-230V: 5.6ANo-Load Speed: 5500rpmMin. / Max. Ø of Circular Saw Blade: 185 /190mmBore Ø of Circular Saw Blade: 20mmMax Thickness of Circular Saw...

Crown CT15188-185 Circular Saw 1500W 7" • Depth Adjustment• Angular Adjustment• Lock-on Function• Soft grip   Specifications Rated Power: 1500WAmp. at 220V-230V: 6.8ANo-Load Speed: 5500rpmMin. / Max Ø of Circular Saw Blade: 185 /190mmBore Ø of Circular Saw Blade: 20mmMax Thickness of Circular Saw...

Crown CT15210-235 Circular Saw 2000W 9" • Depth Adjustment• Angular Adjustment• Lock-on Function• Soft grip   Specifications Rated Power: 2000WAmp. at 220V-230V: 10ANo-Load Speed4500rpmMin. / Max Ø of circular Saw Blade: 230 /235mmBore Ø of Circular Saw Blade: 30mmMax Thickness of Circular Saw Blade:...

Crown CT18123V Demolition Hammer 1500W • SDS-Max chuck• Impact rate regulation• Vario-lock mode• Anti-vibrations system• Replacement indicatorlight for Carbon Brush• Soft grip Specifications Rated Power: 1500WAmp. at voltage 220V-230V: 6.5AImpact Rate: 900-1900rpmSingle Impact Power: 8-25 JWeight: 10.96kg Lifetime Service Warranty

Crown CT18173H Demolition Hammer 1300W • HEX-17 chuck• Lock-on function• Soft grip Specifications Rated Power: 1300WAmp. at voltage 220V-230V: 5.9AImpact Rate: 2400rpmSingle Impact Power: 20 JWeight: 7.5kg Lifetime Service Warranty

Crown CT19022K Heat Gun 1800W • 3-mode Regulator• Cool Stage• Heat Setting• TemperatureProtection• Stationary Use Specifications Rated Power (Stage I/II/III):100 / 800 / 18000WAmp. at 220V-230V: 7.8ATemperature( Stage I/II/III):50 / 450 / 550° CAir Flow (Stage I/II/III):250L / 250L / 500L per min.Weight: 0.7kg...

Crown CT19023K Heat Gun 2000W • 3-mode Regulator• Cool Stage• Heat Setting• TemperatureProtection• Stationary Use• Soft Grip Specifications Rated Power (Stage I/II/III):60 / 60-2000 / 120-2000WAmp. at 220V-230V: 8.7ATemperature( Stage I/II/III):50 / 50-600 / 50-600° CAir Flow (Stage I/II/III):250L / 250L / 500L per...

Crown CT12018 Impact Wrench 900W • 1/2" square tool holder• Reverse function• Soft grip Specifications Rated Power: 900WAmp. at 220V-230V: 4.3ANo-Load Speed: 2100rpmImpact Rate: 2700rpmChuck Type: Gear Rim ChuckMax. Torque: 320NmTool Holder: 1/2" squareMin./Max. bolt and nut diameter: M8-M24Weight: 3.5kg Lifetime Service Warranty

Crown CT15212 Jigsaw 550W • Stroke Regulation• Stage Pendullum• Angular Adjustment• Easy Change• Lock-on Function• Soft Grip Specifications Rated Power: 550WAmp. at 220V-230V: 2.4ANo-Load Stroke Rate: 700-3000rpmStroke Length: 18mmMax Cutting Thickness (Wood): 65mmMax Cutting Thickness (Aluminum): 10mmMax Cutting Thickness (Steel): 6mmMax Cutting Angle (Left/Right):...